We all know that the brakes of electric vehicles will not be so flexible after a long time, so how to adjust the braking system of electric vehicles? Take you to understand specifically.
1. Lubrication is an important part of maintaining electric vehicles, should be front axle, middle axle, flywheel, front fork shock absorber pivot point and other components should be scrubbed every six months to one year, and butter or oil should be added as needed.
2. Adjustment of the brake system: Loosen the screw on the brake wire fixing seat, then tighten or loosen the brake wire, so that the average distance between the brake blocks on both sides and the rim is 1.5mm-2mm, and then tighten the screw.
3. Sometimes the chain will loosen after riding for a period of time. The adjustment method is as follows:
Loosen the rear axle nut, tighten the chain adjustment until the chain is tight enough, and pay attention that the rear wheel is parallel to the frame, and then tighten the nuts on both sides. If the chain is too tight, just reverse the above method. The chain is tight and tight (sag 10mm-15mm).
4. When adjusting the height of the handlebar, pay attention that the safety wire on the saddle should not be exposed. And note that the tightening torque of the core screw is not less than 18N.m. Tighten the bolts to the crossbar with a torque of not less than 18N.m.
5. When adjusting the height of the saddle, pay attention that the safety wire on the saddle should not be exposed, and pay attention that the tightening torque of the saddle clamping nut and the saddle tube clamping bolt is not less than 18N.m.
6. Always check whether the brake performance is good, pay attention to rain, snow and increase the braking distance when riding.
The above is the content introduced to you, you can understand in detail, I hope it can help you.
Post time: Mar-04-2022
